Ventoxx RV 30

Ventoxx ventilation systems Ventilation devices Ventoxx RV-30 refer to the standard product line of Ventoxx systems. With a circular mounting shell, this species of Ventoxx system is ideal for both new buildings and for energy-efficient renovation of buildings.

Ventoxx RV-30 is installed at any thickness of walls, starting from 310 mm. The required length of the pipe is set by the necessary number of rings. Thus there is no need for cutting.

To have a good level of ventilation in passive or energy-saving house with its living space of about 100 m², it is often enough to install 4 ventilation Ventoxx units.

Supplied ventilation unit RV-30 includes

Ventoxx RV 30 ventilation unit - 3D cross-section
1. Inside cap;
2. 3D filter G3 class;
3. Reversible fan;
4. Insulation material;
5. Ceramic heat accumulator;
6. Plastic cover consisting of stacking rings;
7. Outside cover.

Ventoxx RV 30 Technische Daten

Number of operation modes	17
Number of speed levels in reverse	5
Ventilation volume in reverse, m³/h	8-33
Rate of heat recovery, %	70-91
Ventilation volume in “maximum ventilation” operation mode, m³/h	up to 100
Noise level, dB(A)	21-43
Power requirement, W	1,6-2,75
Power requirement during maximum ventilation, W	4,78
Voltage, V	230 VAC or 12 VDC
Speed of Rotation, min^-1	825/2205
Type of heat exchanger	High Tech heat accumulator
Diameter of the Mounting Hole, mm	not less than 235
Operation temperature, °C	-20 up to +50
Operating Voltage, VDC	12
Size	Minimum length of telescopic pipe - 300 mm Diameter - 226 mm Inner cover: diameter - 240 mm Outer cover: height - 290 mm Width - 280 mm
Type of positioning	Horizontal placement on outer wall
Maintenance	Filter does not need any replacement. Cartridge with heat accumulator and filter should be checked every three months to make sure that cleaning is necessary.
Protection Class: Fan Control	IP 33 IP 20
Filter	G3
Class of energy efficiency	A